Automotive EMC labs: components, vehicles and type approval.
Vehicles pack dozens of electronic units into a small space. Automotive EMC methods test each unit on a bench before it ever meets the car.
The methods most labs start with
- CISPR 25: emissions from components, measured on a bench with a ground plane in a shielded chamber
- ISO 11452 series: immunity of components to radiated and conducted disturbances
- ISO 7637 series: electrical transients on supply and signal lines
- UN Regulation No. 10 (UN ECE R10): EMC requirements for vehicle type approval, which reference these methods
What it means for the lab
A component lab needs a chamber sized for the bench set-up and the antenna positions of CISPR 25, artificial networks, high-power amplifiers for immunity, and transient generators. A vehicle lab adds a large chamber with a heavy-duty turntable or dynamometer.
Type approval itself is granted by an approval authority, on the basis of tests by a designated technical service. Labs that prepare products for that step, or want to become a technical service, need equipment and procedures that match the regulation's current series of amendments.
Go deeper on testups.com
Planning an EMC lab or an upgrade?
TESTUPS designs, sources and supplies EMC chambers, test systems and components, and supports installation, site validation and accreditation preparation.