EMC Testing Standards
Electromagnetic Compatibility (EMC) tests are performed according to standards published by official or private organizations.
Various electromagnetic compatibility (EMC) testing standards exist. Countries applying CE marking regulations, are using EMC Directive 2014/30/EU and harmonised standards under this directive.
Harmonised standards under EMC Directive 2014/30/EU are listed on European Commission’s web page and Official Journal.
You can see a list of EMC testing standards listed as harmonised standards of EMC Directive 2014/30/EU. The list shows the standards on 24 January 2019. Recent version is on the link provided below this list.
(Publication of titles and references of harmonised standards under Union harmonisation legislation)
ESO (1) |
Reference and title of the standard |
First publication OJ |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard |
CEN | EN 617:2001+A1:2010Continuous handling equipment and systems – Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
13/05/2016 |
||
CEN | EN 618:2002+A1:2010Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
13/05/2016 |
||
CEN | EN 619:2002+A1:2010Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of unit loads |
13/05/2016 |
||
CEN | EN 620:2002+A1:2010Continuous handling equipment and systems – Safety and EMC requirements for fixed belt conveyors for bulk materials |
13/05/2016 |
||
CEN | EN 1155:1997Building hardware – Electrically powered hold-open devices for swing doors – Requirements and test methods |
13/05/2016 |
||
EN 1155:1997/A1:2002 |
13/05/2016 |
|||
CEN | EN 12015:2014Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Emission |
13/05/2016 |
||
CEN | EN 12016:2013Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Immunity |
13/05/2016 |
||
CEN | EN 12895:2015 (new)Industrial trucks – Electromagnetic compatibility | |||
CEN | EN 13241-1:2003+A1:2011Industrial, commercial and garage doors and gates – Product standard – Part 1: Products without fire resistance or smoke control characteristics |
13/05/2016 |
||
CEN | EN 13309:2010Construction machinery – Electromagnetic compatibility of machines with internal power supply |
13/05/2016 |
||
CEN | EN 14010:2003+A1:2009Safety of machinery – Equipment for power driven parking of motor vehicles – Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
13/05/2016 |
||
CEN | EN ISO 14982:2009Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria (ISO 14982:1998) |
13/05/2016 |
||
CEN | EN 16361:2013+A1:2016 (new)Power operated pedestrian doors – Product standard, performance characteristics – Pedestrian doorsets, other than swing type, initially designed for installation with power operation |
EN 16361:2013 |
30/11/2018 |
|
Cenelec | EN 50065-1:2011Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz – Part 1: General requirements, frequency bands and electromagnetic disturbances |
13/05/2016 |
||
Cenelec | EN 50065-2-1:2003Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz – Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments |
13/05/2016 |
||
EN 50065-2-1:2003/AC:2003 |
13/05/2016 |
|||
EN 50065-2-1:2003/A1:2005 |
13/05/2016 |
|||
Cenelec | EN 50065-2-2:2003Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz – Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments |
13/05/2016 |
||
EN 50065-2-2:2003/A1:2005 |
13/05/2016 |
|||
EN 50065-2-2:2003/AC:2003 |
13/05/2016 |
|||
EN 50065-2-2:2003/A1:2005/AC:2006 |
13/05/2016 |
|||
Cenelec | EN 50065-2-3:2003Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz – Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors |
13/05/2016 |
||
EN 50065-2-3:2003/A1:2005 |
13/05/2016 |
|||
EN 50065-2-3:2003/AC:2003 |
13/05/2016 |
|||
Cenelec | EN 50083-2:2012Cable networks for television signals, sound signals and interactive services – Part 2: Electromagnetic compatibility for equipment |
13/05/2016 |
||
EN 50083-2:2012/A1:2015 |
13/05/2016 |
14/09/2018 |
||
Cenelec | EN 50121-1:2006Railway applications – Electromagnetic compatibility – Part 1: General |
12/08/2016 |
||
EN 50121-1:2006/AC:2008 |
12/08/2016 |
|||
Cenelec | EN 50121-2:2006Railway applications – Electromagnetic compatibility – Part 2: Emission of the whole railway system to the outside world |
12/08/2016 |
||
EN 50121-2:2006/AC:2008 |
12/08/2016 |
|||
Cenelec | EN 50121-3-1:2017 (new)Railway applications – Electromagnetic compatibility – Part 3-1: Rolling stock – Train and complete vehicle |
EN 50121-3-1:2006 |
30/11/2018 |
|
Cenelec | EN 50121-3-2:2016 (new)Railway applications – Electromagnetic compatibility – Part 3-2: Rolling stock – Apparatus |
EN 50121-3-2:2006 |
30/11/2018 |
|
Cenelec | EN 50121-4:2016 (new)Railway applications – Electromagnetic compatibility – Part 4: Emission and immunity of the signalling and telecommunications apparatus |
EN 50121-4:2006 |
30/11/2018 |
|
Cenelec | EN 50121-5:2017 (new)Railway applications – Electromagnetic compatibility – Part 5: Emission and immunity of fixed power supply installations and apparatus |
EN 50121-5:2006 |
30/11/2018 |
|
Cenelec | EN 50130-4:2011Alarm systems – Part 4: Electromagnetic compatibility – Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems |
13/05/2016 |
||
Cenelec | EN 50148:1995Electronic taximeters |
13/05/2016 |
||
Cenelec | EN 50270:2015 (new)Electromagnetic compatibility – Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
EN 50270:2006 |
30/11/2018 |
|
EN 50270:2015/AC:2016-08 (new) | ||||
Cenelec | EN 50293:2012Road traffic signal systems – Electromagnetic compatibility |
13/05/2016 |
||
Cenelec | EN 50370-1:2005Electromagnetic compatibility (EMC) – Product family standard for machine tools – Part 1: Emission |
13/05/2016 |
||
Cenelec | EN 50370-2:2003Electromagnetic compatibility (EMC) – Product family standard for machine tools – Part 2: Immunity |
13/05/2016 |
||
Cenelec | EN 50412-2-1:2005Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz – Part 2-1: Residential, commercial and industrial environment – Immunity requirements |
13/05/2016 |
||
EN 50412-2-1:2005/AC:2009 |
13/05/2016 |
|||
Cenelec | EN 50428:2005Switches for household and similar fixed electrical installations – Collateral standard – Switches and related accessories for use in home and building electronic systems (HBES) |
13/05/2016 |
||
EN 50428:2005/A1:2007 |
13/05/2016 |
|||
EN 50428:2005/A2:2009 |
13/05/2016 |
|||
Cenelec | EN 50470-1:2006Electricity metering equipment (a.c.) – Part 1: General requirements, tests and test conditions – Metering equipment (class indexes A, B and C) |
13/05/2016 |
||
Cenelec | EN 50490:2008Electrical installations for lighting and beaconing of aerodromes – Technical requirements for aeronautical ground lighting control and monitoring systems – Units for selective switching and monitoring of individual lamps |
13/05/2016 |
||
Cenelec | EN 50491-5-1:2010General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 5-1: EMC requirements, conditions and test set-up |
13/05/2016 |
||
Cenelec | EN 50491-5-2:2010General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment |
13/05/2016 |
||
Cenelec | EN 50491-5-3:2010General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 5-3: EMC requirements for HBES/BACS used in industry environment |
13/05/2016 |
||
Cenelec | EN 50498:2010Electromagnetic compatibility (EMC) – Product family standard for aftermarket electronic equipment in vehicles |
13/05/2016 |
||
Cenelec | EN 50512:2009Electrical installations for lighting and beaconing of aerodromes – Advanced Visual Docking Guidance Systems (A-VDGS) |
13/05/2016 |
||
Cenelec | EN 50529-1:2010EMC Network Standard – Part 1: Wire-line telecommunications networks using telephone wires |
13/05/2016 |
||
Cenelec | EN 50529-2:2010EMC Network Standard – Part 2: Wire-line telecommunications networks using coaxial cables |
13/05/2016 |
||
Cenelec | EN 50550:2011Power frequency overvoltage protective device for household and similar applications (POP) |
13/05/2016 |
||
EN 50550:2011/AC:2012 |
13/05/2016 |
|||
EN 50550:2011/A1:2014 |
13/05/2016 |
28/07/2017 |
||
Cenelec | EN 50557:2011Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
13/05/2016 |
||
Cenelec | EN 50561-1:2013Power line communication apparatus used in low-voltage installations – Radio disturbance characteristics – Limits and methods of measurement – Part 1: Apparatus for in-home use |
13/05/2016 |
EN 55022:2010 |
09/10/2016 |
Cenelec | EN 55011:2009Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement CISPR 11:2009 (Modified) |
13/05/2016 |
||
EN 55011:2009/A1:2010 CISPR 11:2009/A1:2010 |
13/05/2016 |
|||
Cenelec | EN 55012:2007Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of off-board receivers CISPR 12:2007 |
13/05/2016 |
||
EN 55012:2007/A1:2009 CISPR 12:2007/A1:2009 |
13/05/2016 |
|||
Cenelec | EN 55014-1:2006Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission CISPR 14-1:2005 |
13/05/2016 |
||
EN 55014-1:2006/A2:2011 CISPR 14-1:2005/A2:2011 |
13/05/2016 |
|||
EN 55014-1:2006/A1:2009 CISPR 14-1:2005/A1:2008 |
13/05/2016 |
|||
Cenelec | EN 55014-2:1997Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 2: Immunity – Product family standard CISPR 14-2:1997 |
12/08/2016 |
||
EN 55014-2:1997/A2:2008 CISPR 14-2:1997/A2:2008 |
12/08/2016 |
|||
EN 55014-2:1997/AC:1997 |
12/08/2016 |
|||
EN 55014-2:1997/A1:2001 CISPR 14-2:1997/A1:2001 |
12/08/2016 |
|||
Cenelec | EN 55015:2013Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment CISPR 15:2013 + IS1:2013 + IS2:2013 |
13/05/2016 |
EN 55015:2006 |
12/06/2016 |
Cenelec | EN 55024:2010Information technology equipment – Immunity characteristics – Limits and methods of measurement CISPR 24:2010 |
13/05/2016 |
||
Cenelec | EN 55032:2012Electromagnetic compatibility of multimedia equipment – Emission requirements CISPR 32:2012 |
12/08/2016 |
EN 55022:2010 |
05/03/2017 |
EN 55032:2012/AC:2013 |
12/08/2016 |
|||
Cenelec | EN 55103-1:2009Electromagnetic compatibility – Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use – Part 1: Emissions |
12/08/2016 |
||
EN 55103-1:2009/A1:2012 |
12/08/2016 |
|||
Cenelec | EN 55103-2:2009Electromagnetic compatibility – Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use – Part 2: Immunity |
13/05/2016 |
||
Cenelec | EN 60034-1:2010Rotating electrical machines – Part 1: Rating and performance IEC 60034-1:2010 (Modified) |
13/05/2016 |
||
EN 60034-1:2010/AC:2010 |
13/05/2016 |
|||
Cenelec | EN 60204-31:2013Safety of machinery – Electrical equipment of machines – Part 31: Particular safety and EMC requirements for sewing machines, units and systems IEC 60204-31:2013 |
13/05/2016 |
EN 60204-31:1998 |
28/05/2016 |
Cenelec | EN 60255-26:2013Measuring relays and protection equipment – Part 26: Electromagnetic compatibility requirements IEC 60255-26:2013 |
13/05/2016 |
||
EN 60255-26:2013/AC:2013 |
13/05/2016 |
|||
Cenelec | EN 60669-2-1:2004Switches for household and similar fixed electrical installations – Part 2-1: Particular requirements – Electronic switches IEC 60669-2-1:2002 (Modified) + IS1:2011 + IS2:2012 |
13/05/2016 |
||
EN 60669-2-1:2004/AC:2007 |
13/05/2016 |
|||
EN 60669-2-1:2004/A1:2009 IEC 60669-2-1:2002/A1:2008 (Modified) |
13/05/2016 |
|||
EN 60669-2-1:2004/A12:2010 |
13/05/2016 |
|||
Cenelec | EN 60730-1:2011Automatic electrical controls for household and similar use – Part 1: General requirements IEC 60730-1:2010 (Modified) |
13/05/2016 |
EN 60730-1:2000 |
28/06/2016 |
Cenelec | EN 60730-2-5:2002Automatic electrical controls for household and similar use – Part 2-5: Particular requirements for automatic electrical burner control systems IEC 60730-2-5:2000 (Modified) |
12/08/2016 |
||
EN 60730-2-5:2002/A11:2005 |
12/08/2016 |
|||
EN 60730-2-5:2002/A1:2004 IEC 60730-2-5:2000/A1:2004 (Modified) |
12/08/2016 |
|||
EN 60730-2-5:2002/A2:2010 IEC 60730-2-5:2000/A2:2008 (Modified) |
12/08/2016 |
|||
Cenelec | EN 60730-2-6:2008Automatic electrical controls for household and similar use – Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements IEC 60730-2-6:2007 (Modified) |
12/08/2016 |
||
Cenelec | EN 60730-2-7:2010Automatic electrical controls for household and similar use – Part 2-7: Particular requirements for timers and time switches IEC 60730-2-7:2008 (Modified) |
13/05/2016 |
||
EN 60730-2-7:2010/AC:2011 |
13/05/2016 |
|||
Cenelec | EN 60730-2-8:2002Automatic electrical controls for household and similar use – Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements IEC 60730-2-8:2000 (Modified) |
13/05/2016 |
||
EN 60730-2-8:2002/A1:2003 IEC 60730-2-8:2000/A1:2002 (Modified) |
13/05/2016 |
|||
Cenelec | EN 60730-2-9:2010Automatic electrical controls for household and similar use – Part 2-9: Particular requirements for temperature sensing controls IEC 60730-2-9:2008 (Modified) |
13/05/2016 |
||
Cenelec | EN 60730-2-14:1997Automatic electrical controls for household and similar use – Part 2-14: Particular requirements for electric actuators IEC 60730-2-14:1995 (Modified) |
13/05/2016 |
||
EN 60730-2-14:1997/A1:2001 IEC 60730-2-14:1995/A1:2001 |
13/05/2016 |
|||
Cenelec | EN 60730-2-15:2010Automatic electrical controls for household and similar use – Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls IEC 60730-2-15:2008 (Modified) |
13/05/2016 |
||
Cenelec | EN 60870-2-1:1996Telecontrol equipment and systems – Part 2: Operating conditions – Section 1: Power supply and electromagnetic compatibility IEC 60870-2-1:1995 |
13/05/2016 |
||
Cenelec | EN 60945:2002Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results IEC 60945:2002 |
13/05/2016 |
||
Cenelec | EN 60947-1:2007Low-voltage switchgear and controlgear – Part 1: General rules IEC 60947-1:2007 |
13/05/2016 |
||
EN 60947-1:2007/A2:2014 IEC 60947-1:2007/A2:2014 |
13/05/2016 |
14/10/2017 |
||
EN 60947-1:2007/A1:2011 IEC 60947-1:2007/A1:2010 |
13/05/2016 |
|||
Cenelec | EN 60947-2:2006Low-voltage switchgear and controlgear – Part 2: Circuit-breakers IEC 60947-2:2006 |
13/05/2016 |
||
EN 60947-2:2006/A1:2009 IEC 60947-2:2006/A1:2009 |
13/05/2016 |
|||
EN 60947-2:2006/A2:2013 IEC 60947-2:2006/A2:2013 |
13/05/2016 |
|||
Cenelec | EN 60947-3:2009Low-voltage switchgear and controlgear – Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units IEC 60947-3:2008 |
13/05/2016 |
||
EN 60947-3:2009/A1:2012 IEC 60947-3:2008/A1:2012 |
13/05/2016 |
|||
Cenelec | EN 60947-4-1:2010Low-voltage switchgear and controlgear – Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters IEC 60947-4-1:2009 |
13/05/2016 |
||
EN 60947-4-1:2010/A1:2012 IEC 60947-4-1:2009/A1:2012 |
13/05/2016 |
|||
Cenelec | EN 60947-4-2:2012Low-voltage switchgear and controlgear – Part 4-2: Contactors and motor-starters – AC semiconductor motor controllers and starters IEC 60947-4-2:2011 |
13/05/2016 |
||
Cenelec | EN 60947-4-3:2014Low-voltage switchgear and controlgear – Part 4-3: Contactors and motor-starters – AC semiconductor controllers and contactors for non-motor loads IEC 60947-4-3:2014 |
13/05/2016 |
EN 60947-4-3:2000 |
11/06/2017 |
Cenelec | EN 60947-5-1:2004Low-voltage switchgear and controlgear – Part 5-1: Control circuit devices and switching elements – Electromechanical control circuit devices IEC 60947-5-1:2003 |
13/05/2016 |
||
EN 60947-5-1:2004/AC:2005 |
13/05/2016 |
|||
EN 60947-5-1:2004/A1:2009 IEC 60947-5-1:2003/A1:2009 |
13/05/2016 |
|||
EN 60947-5-1:2004/AC:2004 |
13/05/2016 |
|||
Cenelec | EN 60947-5-2:2007Low-voltage switchgear and controlgear – Part 5-2: Control circuit devices and switching elements – Proximity switches IEC 60947-5-2:2007 |
13/05/2016 |
||
EN 60947-5-2:2007/A1:2012 IEC 60947-5-2:2007/A1:2012 |
13/05/2016 |
|||
Cenelec | EN 60947-5-3:1999Low-voltage switchgear and controlgear – Part 5-3: Control circuit devices and switching elements – Requirements for proximity devices with defined behaviour under fault conditions (PDF) IEC 60947-5-3:1999 |
13/05/2016 |
||
EN 60947-5-3:1999/A1:2005 IEC 60947-5-3:1999/A1:2005 |
13/05/2016 |
|||
Cenelec | EN 60947-5-6:2000Low-voltage switchgear and controlgear – Part 5-6: Control circuit devices and switching elements – DC interface for proximity sensors and switching amplifiers (NAMUR) IEC 60947-5-6:1999 |
13/05/2016 |
||
Cenelec | EN 60947-5-7:2003Low-voltage switchgear and controlgear – Part 5-7: Control circuit devices and switching elements – Requirements for proximity devices with analogue output IEC 60947-5-7:2003 |
13/05/2016 |
||
Cenelec | EN 60947-5-9:2007Low-voltage switchgear and controlgear – Part 5-9: Control circuit devices and switching elements – Flow rate switches IEC 60947-5-9:2006 |
13/05/2016 |
||
Cenelec | EN 60947-6-1:2005Low-voltage switchgear and controlgear – Part 6-1: Multiple function equipment – Transfer switching equipment IEC 60947-6-1:2005 |
13/05/2016 |
||
EN 60947-6-1:2005/A1:2014 IEC 60947-6-1:2005/A1:2013 |
13/05/2016 |
17/01/2017 |
||
Cenelec | EN 60947-6-2:2003Low-voltage switchgear and controlgear – Part 6-2: Multiple function equipment – Control and protective switching devices (or equipment) (CPS) IEC 60947-6-2:2002 |
13/05/2016 |
||
EN 60947-6-2:2003/A1:2007 IEC 60947-6-2:2002/A1:2007 |
13/05/2016 |
|||
Cenelec | EN 60947-8:2003Low-voltage switchgear and controlgear – Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines IEC 60947-8:2003 |
13/05/2016 |
||
EN 60947-8:2003/A2:2012 IEC 60947-8:2003/A2:2011 |
13/05/2016 |
|||
EN 60947-8:2003/A1:2006 IEC 60947-8:2003/A1:2006 |
13/05/2016 |
|||
Cenelec | EN 60974-10:2014Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements IEC 60974-10:2014 |
13/05/2016 |
EN 60974-10:2007 |
13/03/2017 |
Cenelec | EN 61000-3-2:2014Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) IEC 61000-3-2:2014 |
13/05/2016 |
EN 61000-3-2:2006 |
30/06/2017 |
Cenelec | EN 61000-3-3:2013Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection IEC 61000-3-3:2013 |
13/05/2016 |
EN 61000-3-3:2008 |
18/06/2016 |
Cenelec | EN 61000-3-11:2000Electromagnetic compatibility (EMC) – Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current <= 75 A and subject to conditional connection IEC 61000-3-11:2000 |
13/05/2016 |
||
Cenelec | EN 61000-3-12:2011Electromagnetic compatibility (EMC) – Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase IEC 61000-3-12:2011 + IS1:2012 |
13/05/2016 |
||
Cenelec | EN 61000-6-1:2007Electromagnetic compatibility (EMC) – Part 6-1: Generic standards – Immunity for residential, commercial and light-industrial environments IEC 61000-6-1:2005 |
13/05/2016 |
||
Cenelec | EN 61000-6-2:2005Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for industrial environments IEC 61000-6-2:2005 |
13/05/2016 |
||
EN 61000-6-2:2005/AC:2005 |
13/05/2016 |
|||
Cenelec | EN 61000-6-3:2007Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments IEC 61000-6-3:2006 |
13/05/2016 |
||
EN 61000-6-3:2007/A1:2011 IEC 61000-6-3:2006/A1:2010 |
13/05/2016 |
|||
EN 61000-6-3:2007/A1:2011/AC:2012 |
13/05/2016 |
|||
Cenelec | EN 61000-6-4:2007Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments IEC 61000-6-4:2006 |
13/05/2016 |
||
EN 61000-6-4:2007/A1:2011 IEC 61000-6-4:2006/A1:2010 |
13/05/2016 |
|||
Cenelec | EN 61000-6-5:2015 (new)Electromagnetic compatibility (EMC) – Part 6-5: Generic standards – Immunity for equipment used in power station and substation environment IEC 61000-6-5:2015 |
|||
Cenelec | EN 61008-1:2012Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) – Part 1: General rules IEC 61008-1:2010 (Modified) |
13/05/2016 |
EN 61008-1:2004 |
18/06/2017 |
EN 61008-1:2012/A1:2014 IEC 61008-1:2010/A1:2012 (Modified) |
13/05/2016 |
04/08/2017 |
||
Cenelec | EN 61009-1:2012Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) – Part 1: General rules IEC 61009-1:2010 (Modified) |
13/05/2016 |
EN 61009-1:2004 |
18/06/2017 |
Cenelec | EN 61131-2:2007Programmable controllers – Part 2: Equipment requirements and tests IEC 61131-2:2007 |
13/05/2016 |
||
Cenelec | EN 61204-3:2000Low voltage power supplies, d.c. output – Part 3: Electromagnetic compatibility (EMC) IEC 61204-3:2000 |
13/05/2016 |
||
Cenelec | EN 61326-1:2013Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements IEC 61326-1:2012 |
13/05/2016 |
||
Cenelec | EN 61326-2-1:2013Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-1: Particular requirements – Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications IEC 61326-2-1:2012 |
13/05/2016 |
||
Cenelec | EN 61326-2-2:2013Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-2: Particular requirements – Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems IEC 61326-2-2:2012 |
13/05/2016 |
||
Cenelec | EN 61326-2-3:2013Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-3: Particular requirements – Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning IEC 61326-2-3:2012 |
13/05/2016 |
||
Cenelec | EN 61326-2-4:2013Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-4: Particular requirements – Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 IEC 61326-2-4:2012 |
13/05/2016 |
||
Cenelec | EN 61326-2-5:2013Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-5: Particular requirements – Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 IEC 61326-2-5:2012 |
13/05/2016 |
||
Cenelec | EN 61439-1:2011Low-voltage switchgear and controlgear assemblies – Part 1: General rules IEC 61439-1:2011 |
13/05/2016 |
||
EN 61439-1:2011 does not give presumption of conformity without another part of the standard. | ||||
Cenelec | EN 61439-2:2011Low-voltage switchgear and controlgear assemblies – Part 2: Power switchgear and controlgear assemblies IEC 61439-2:2011 |
13/05/2016 |
||
Cenelec | EN 61439-3:2012Low-voltage switchgear and controlgear assemblies – Part 3: Distribution boards intended to be operated by ordinary persons (DBO) IEC 61439-3:2012 |
13/05/2016 |
||
Cenelec | EN 61439-4:2013Low-voltage switchgear and controlgear assemblies – Part 4: Particular requirements for assemblies for construction sites (ACS) IEC 61439-4:2012 |
13/05/2016 |
||
Cenelec | EN 61439-5:2011Low-voltage switchgear and controlgear assemblies – Part 5: Assemblies for power distribution in public networks IEC 61439-5:2010 |
12/08/2016 |
||
Cenelec | EN 61439-6:2012Low-voltage switchgear and controlgear assemblies – Part 6: Busbar trunking systems (busways) IEC 61439-6:2012 |
13/05/2016 |
||
Cenelec | EN 61543:1995Residual current-operated protective devices (RCDs) for household and similar use – Electromagnetic compatibility IEC 61543:1995 |
13/05/2016 |
||
EN 61543:1995/A2:2006 IEC 61543:1995/A2:2005 |
13/05/2016 |
|||
EN 61543:1995/A11:2003/AC:2004 |
13/05/2016 |
|||
EN 61543:1995/AC:1997 |
13/05/2016 |
|||
EN 61543:1995/A11:2003 |
13/05/2016 |
|||
EN 61543:1995/A12:2005 |
13/05/2016 |
|||
Cenelec | EN 61547:2009Equipment for general lighting purposes – EMC immunity requirements IEC 61547:2009 + IS1:2013 |
13/05/2016 |
||
Cenelec | EN 61557-12:2008Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 12: Performance measuring and monitoring devices (PMD) IEC 61557-12:2007 |
13/05/2016 |
||
Cenelec | EN 61800-3:2004Adjustable speed electrical power drive systems – Part 3: EMC requirements and specific test methods IEC 61800-3:2004 |
13/05/2016 |
||
EN 61800-3:2004/A1:2012 IEC 61800-3:2004/A1:2011 |
13/05/2016 |
|||
Cenelec | EN 61812-1:2011Time relays for industrial and residential use – Part 1: Requirements and tests IEC 61812-1:2011 |
13/05/2016 |
||
Cenelec | EN 62020:1998Electrical accessories – Residual current monitors for household and similar uses (RCMs) IEC 62020:1998 |
13/05/2016 |
||
EN 62020:1998/A1:2005 IEC 62020:1998/A1:2003 (Modified) |
13/05/2016 |
|||
Cenelec | EN 62026-1:2007Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 1: General rules IEC 62026-1:2007 |
13/05/2016 |
||
EN 62026-1:2007 does not give presumption of conformity without another part of the standard. | ||||
Cenelec | EN 62026-2:2013Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 2: Actuator sensor interface (AS-i) IEC 62026-2:2008 (Modified) |
13/05/2016 |
||
Cenelec | EN 62026-3:2009Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 3: DeviceNet IEC 62026-3:2008 |
12/08/2016 |
||
Cenelec | EN 62026-7:2013Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 7: CompoNet IEC 62026-7:2010 (Modified) |
13/05/2016 |
||
Cenelec | EN 62040-2:2006Uninterruptible power systems (UPS) – Part 2: Electromagnetic compatibility (EMC) requirements IEC 62 IEC 62040-2:2005 |
13/05/2016 |
||
EN 62040-2:2006/AC:2006 |
13/05/2016 |
|||
Cenelec | EN 62052-11:2003Electricity metering equipment (AC) – General requirements, tests and test conditions – Part 11: Metering equipment IEC 62052-11:2003 |
13/05/2016 |
||
EN 62052-11:2003 does not give presumption of conformity without a part of the EN 62053 series. | ||||
Cenelec | EN 62052-21:2004Electricity metering equipment (a.c.) – General requirements, tests and test conditions – Part 21: Tariff and load control equipment IEC 62052-21:2004 |
13/05/2016 |
||
EN 62052-21:2004 does not give presumption of conformity without a part of the EN 62054 series. | ||||
Cenelec | EN 62053-11:2003Electricity metering equipment (a.c.) – Particular requirements – Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) IEC 62053-11:2003 |
13/05/2016 |
||
Cenelec | EN 62053-21:2003Electricity metering equipment (a.c.) – Particular requirements – Part 21: Static meters for active energy (classes 1 and 2) IEC 62053-21:2003 |
13/05/2016 |
||
Cenelec | EN 62053-22:2003Electricity metering equipment (a.c.) – Particular requirements – Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) IEC 62053-22:2003 |
13/05/2016 |
||
Cenelec | EN 62053-23:2003Electricity metering equipment (a.c.) – Particular requirements – Part 23: Static meters for reactive energy (classes 2 and 3) IEC 62053-23:2003 |
13/05/2016 |
||
Cenelec | EN 62054-11:2004Electricity metering (a.c.) – Tariff and load control – Part 11: Particular requirements for electronic ripple control receivers IEC 62054-11:2004 |
13/05/2016 |
||
Cenelec | EN 62054-21:2004Electricity metering (a.c.) – Tariff and load control – Part 21: Particular requirements for time switches IEC 62054-21:2004 |
13/05/2016 |
||
Cenelec | EN 62135-2:2008Resistance welding equipment – Part 2: Electromagnetic compatibility (EMC) requirements IEC 62135-2:2007 |
12/08/2016 |
||
Cenelec | EN 62310-2:2007Static transfer systems (STS) – Part 2: Electromagnetic compatibility (EMC) requirements IEC 62310-2:2006 (Modified) |
13/05/2016 |
||
Cenelec | EN 62423:2012Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses IEC 62423:2009 (Modified) |
13/05/2016 |
EN 62423:2009 |
19/06/2017 |
Cenelec | EN 62586-1:2014Power quality measurement in power supply systems – Part 1: Power quality instruments (PQI) IEC 62586-1:2013 |
13/05/2016 |
||
Cenelec | EN 62586-2:2014Power quality measurement in power supply systems – Part 2: Functional tests and uncertainty requirements IEC 62586-2:2013 |
13/05/2016 |
||
Cenelec | EN 62606:2013General requirements for arc fault detection devices IEC IEC 62606:2013 (Modified) |
13/05/2016 |
||
ETSI | EN 300 386 V1.6.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements |
13/05/2016 |
||
ETSI | EN 301 489-1 V1.9.2Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements |
13/05/2016 |
||
ETSI | EN 301 489-34 V1.4.1Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones |
13/05/2016 |
(1) ESO: European standardisation organisation:
CEN: Rue de la Science 23, B-1040 Brussels, Phone: +32 2 550 08 11; Fax: +32 2 550 08 19 (http://www.cen.eu)
CENELEC: Rue de la Science 23, B-1040 Brussels, Phone: +32 2 550 08 11; Fax: +32 2 550 08 19 (http://www.cenelec.eu)
ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel.+33 492 944200; fax +33 493 654716, (http://www.etsi.eu)
Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal (“dow”), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.
Note 2.1: The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.
Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.
Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.
Note 3: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.
Source link: https://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/electromagnetic-compatibility_en
Leave a Reply
Want to join the discussion?Feel free to contribute!