Tag Archive for: emctestinglabs

Electromagnetic Compatibility (EMC)

/0 Comments/in , , /by

Electromagnetic Compatibility (EMC)

Electric devices influence each other when interconnected or close to each other. The purpose of electromagnetic compatibility (EMC) is to keep all those side effects under reasonable control. EMC designates all the existing and future techniques and technologies for reducing disturbance and enhancing immunity.

EMC compliance of the products are assessed by the relevant EMC test standards. If the product pass the relevant EMC tests, test report is issued and this report shows the product’s compliance.

EMC testing is performed in EMC testing laboratories. There are various types of EMC labs. They can be grouped into two: pre-compliance and full-compliance. Small businesses (manufacturers, third-party service providers) may prefer to have pre-compliance EMC labs. Full-compliance EMC labs are mostly owned by accredited EMC labs and bigger manufacturers or designers.

EMC Testing Standards

/0 Comments/in /by

Electromagnetic Compatibility (EMC) tests are performed according to standards published by official or private organizations.

Various electromagnetic compatibility (EMC) testing standards exist. Countries applying CE marking regulations, are using EMC Directive 2014/30/EU and harmonised standards under this directive.

Harmonised standards under EMC Directive 2014/30/EU are listed on European Commission’s web page and Official Journal.

You can see a list of EMC testing standards listed as harmonised standards of EMC Directive 2014/30/EU. The list shows the standards on 24 January 2019. Recent version is on the link provided below this list.

(Publication of titles and references of harmonised standards under Union harmonisation legislation)

ESO (1)

Reference and title of the standard
(and reference document)

First publication OJ

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard
Note 1
CEN EN 617:2001+A1:2010Continuous handling equipment and systems – Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

13/05/2016
CEN EN 618:2002+A1:2010Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

13/05/2016
CEN EN 619:2002+A1:2010Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of unit loads

13/05/2016
CEN EN 620:2002+A1:2010Continuous handling equipment and systems – Safety and EMC requirements for fixed belt conveyors for bulk materials

13/05/2016
CEN EN 1155:1997Building hardware – Electrically powered hold-open devices for swing doors – Requirements and test methods

13/05/2016
EN 1155:1997/A1:2002

13/05/2016

Note 3
CEN EN 12015:2014Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Emission

13/05/2016
CEN EN 12016:2013Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Immunity

13/05/2016
CEN EN 12895:2015 (new)Industrial trucks – Electromagnetic compatibility

This is the first publication
CEN EN 13241-1:2003+A1:2011Industrial, commercial and garage doors and gates – Product standard – Part 1: Products without fire resistance or smoke control characteristics

13/05/2016
CEN EN 13309:2010Construction machinery – Electromagnetic compatibility of machines with internal power supply

13/05/2016
CEN EN 14010:2003+A1:2009Safety of machinery – Equipment for power driven parking of motor vehicles – Safety and EMC requirements for design, manufacturing, erection and commissioning stages

13/05/2016
CEN EN ISO 14982:2009Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria (ISO 14982:1998)

13/05/2016
CEN EN 16361:2013+A1:2016 (new)Power operated pedestrian doors – Product standard, performance characteristics – Pedestrian doorsets, other than swing type, initially designed for installation with power operation

This is the first publication

EN 16361:2013

Note 2.1

30/11/2018
Cenelec EN 50065-1:2011Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz – Part 1: General requirements, frequency bands and electromagnetic disturbances

13/05/2016
Cenelec EN 50065-2-1:2003Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz – Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments

13/05/2016
EN 50065-2-1:2003/AC:2003

13/05/2016
EN 50065-2-1:2003/A1:2005

13/05/2016

Note 3
Cenelec EN 50065-2-2:2003Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz – Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments

13/05/2016
EN 50065-2-2:2003/A1:2005

13/05/2016

Note 3
EN 50065-2-2:2003/AC:2003

13/05/2016
EN 50065-2-2:2003/A1:2005/AC:2006

13/05/2016
Cenelec EN 50065-2-3:2003Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz – Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors

13/05/2016
EN 50065-2-3:2003/A1:2005

13/05/2016

Note 3
EN 50065-2-3:2003/AC:2003

13/05/2016
Cenelec EN 50083-2:2012Cable networks for television signals, sound signals and interactive services – Part 2: Electromagnetic compatibility for equipment

13/05/2016
EN 50083-2:2012/A1:2015

13/05/2016

Note 3

14/09/2018
Cenelec EN 50121-1:2006Railway applications – Electromagnetic compatibility – Part 1: General

12/08/2016
EN 50121-1:2006/AC:2008

12/08/2016
Cenelec EN 50121-2:2006Railway applications – Electromagnetic compatibility – Part 2: Emission of the whole railway system to the outside world

12/08/2016
EN 50121-2:2006/AC:2008

12/08/2016
Cenelec EN 50121-3-1:2017 (new)Railway applications – Electromagnetic compatibility – Part 3-1: Rolling stock – Train and complete vehicle

This is the first publication

EN 50121-3-1:2006
EN 50121-3-1:2006/AC:2008

Note 2.1

30/11/2018
Cenelec EN 50121-3-2:2016 (new)Railway applications – Electromagnetic compatibility – Part 3-2: Rolling stock – Apparatus

This is the first publication

EN 50121-3-2:2006
EN 50121-3-2:2006/AC:2008

Note 2.1

30/11/2018
Cenelec EN 50121-4:2016 (new)Railway applications – Electromagnetic compatibility – Part 4: Emission and immunity of the signalling and telecommunications apparatus

This is the first publication

EN 50121-4:2006
EN 50121-4:2006/AC:2008

Note 2.1

30/11/2018
Cenelec EN 50121-5:2017 (new)Railway applications – Electromagnetic compatibility – Part 5: Emission and immunity of fixed power supply installations and apparatus

This is the first publication

EN 50121-5:2006
EN 50121-5:2006/AC:2008

Note 2.1

30/11/2018
Cenelec EN 50130-4:2011Alarm systems – Part 4: Electromagnetic compatibility – Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems

13/05/2016
Cenelec EN 50148:1995Electronic taximeters

13/05/2016
Cenelec EN 50270:2015 (new)Electromagnetic compatibility – Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

This is the first publication

EN 50270:2006

Note 2.1

30/11/2018
EN 50270:2015/AC:2016-08 (new)

This is the first publication
Cenelec EN 50293:2012Road traffic signal systems – Electromagnetic compatibility

13/05/2016
Cenelec EN 50370-1:2005Electromagnetic compatibility (EMC) – Product family standard for machine tools – Part 1: Emission

13/05/2016
Cenelec EN 50370-2:2003Electromagnetic compatibility (EMC) – Product family standard for machine tools – Part 2: Immunity

13/05/2016
Cenelec EN 50412-2-1:2005Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz – Part 2-1: Residential, commercial and industrial environment – Immunity requirements

13/05/2016
EN 50412-2-1:2005/AC:2009

13/05/2016
Cenelec EN 50428:2005Switches for household and similar fixed electrical installations – Collateral standard – Switches and related accessories for use in home and building electronic systems (HBES)

13/05/2016
EN 50428:2005/A1:2007

13/05/2016

Note 3
EN 50428:2005/A2:2009

13/05/2016

Note 3
Cenelec EN 50470-1:2006Electricity metering equipment (a.c.) – Part 1: General requirements, tests and test conditions – Metering equipment (class indexes A, B and C)

13/05/2016
Cenelec EN 50490:2008Electrical installations for lighting and beaconing of aerodromes – Technical requirements for aeronautical ground lighting control and monitoring systems – Units for selective switching and monitoring of individual lamps

13/05/2016
Cenelec EN 50491-5-1:2010General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 5-1: EMC requirements, conditions and test set-up

13/05/2016
Cenelec EN 50491-5-2:2010General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment

13/05/2016
Cenelec EN 50491-5-3:2010General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 5-3: EMC requirements for HBES/BACS used in industry environment

13/05/2016
Cenelec EN 50498:2010Electromagnetic compatibility (EMC) – Product family standard for aftermarket electronic equipment in vehicles

13/05/2016
Cenelec EN 50512:2009Electrical installations for lighting and beaconing of aerodromes – Advanced Visual Docking Guidance Systems (A-VDGS)

13/05/2016
Cenelec EN 50529-1:2010EMC Network Standard – Part 1: Wire-line telecommunications networks using telephone wires

13/05/2016
Cenelec EN 50529-2:2010EMC Network Standard – Part 2: Wire-line telecommunications networks using coaxial cables

13/05/2016
Cenelec EN 50550:2011Power frequency overvoltage protective device for household and similar applications (POP)

13/05/2016
EN 50550:2011/AC:2012

13/05/2016
EN 50550:2011/A1:2014

13/05/2016

Note 3

28/07/2017
Cenelec EN 50557:2011Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses

13/05/2016
Cenelec EN 50561-1:2013Power line communication apparatus used in low-voltage installations – Radio disturbance characteristics – Limits and methods of measurement – Part 1: Apparatus for in-home use

13/05/2016

EN 55022:2010
EN 55032:2012

Note 2.3

09/10/2016
Cenelec EN 55011:2009Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement
CISPR 11:2009 (Modified)

13/05/2016
EN 55011:2009/A1:2010
CISPR 11:2009/A1:2010

13/05/2016

Note 3
Cenelec EN 55012:2007Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of off-board receivers
CISPR 12:2007

13/05/2016
EN 55012:2007/A1:2009
CISPR 12:2007/A1:2009

13/05/2016

Note 3
Cenelec EN 55014-1:2006Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission
CISPR 14-1:2005

13/05/2016
EN 55014-1:2006/A2:2011
CISPR 14-1:2005/A2:2011

13/05/2016

Note 3
EN 55014-1:2006/A1:2009
CISPR 14-1:2005/A1:2008

13/05/2016

Note 3
Cenelec EN 55014-2:1997Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 2: Immunity – Product family standard
CISPR 14-2:1997

12/08/2016
EN 55014-2:1997/A2:2008
CISPR 14-2:1997/A2:2008

12/08/2016

Note 3
EN 55014-2:1997/AC:1997

12/08/2016
EN 55014-2:1997/A1:2001
CISPR 14-2:1997/A1:2001

12/08/2016

Note 3
Cenelec EN 55015:2013Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
CISPR 15:2013 + IS1:2013 + IS2:2013

13/05/2016

EN 55015:2006
+ A1:2007
+ A2:2009

Note 2.1

12/06/2016
Cenelec EN 55024:2010Information technology equipment – Immunity characteristics – Limits and methods of measurement
CISPR 24:2010

13/05/2016
Cenelec EN 55032:2012Electromagnetic compatibility of multimedia equipment – Emission requirements
CISPR 32:2012

12/08/2016

EN 55022:2010
EN 55103-1:2009# + A1:2012

Note 2.2

05/03/2017
EN 55032:2012/AC:2013

12/08/2016
Cenelec EN 55103-1:2009Electromagnetic compatibility – Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use – Part 1: Emissions

12/08/2016
EN 55103-1:2009/A1:2012

12/08/2016

Note 3
Cenelec EN 55103-2:2009Electromagnetic compatibility – Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use – Part 2: Immunity

13/05/2016
Cenelec EN 60034-1:2010Rotating electrical machines – Part 1: Rating and performance
IEC 60034-1:2010 (Modified)

13/05/2016
EN 60034-1:2010/AC:2010

13/05/2016
Cenelec EN 60204-31:2013Safety of machinery – Electrical equipment of machines – Part 31: Particular safety and EMC requirements for sewing machines, units and systems
IEC 60204-31:2013

13/05/2016

EN 60204-31:1998

Note 2.1

28/05/2016
Cenelec EN 60255-26:2013Measuring relays and protection equipment – Part 26: Electromagnetic compatibility requirements
IEC 60255-26:2013

13/05/2016
EN 60255-26:2013/AC:2013

13/05/2016
Cenelec EN 60669-2-1:2004Switches for household and similar fixed electrical installations – Part 2-1: Particular requirements – Electronic switches
IEC 60669-2-1:2002 (Modified) + IS1:2011 + IS2:2012

13/05/2016
EN 60669-2-1:2004/AC:2007

13/05/2016
EN 60669-2-1:2004/A1:2009
IEC 60669-2-1:2002/A1:2008 (Modified)

13/05/2016

Note 3
EN 60669-2-1:2004/A12:2010

13/05/2016

Note 3
Cenelec EN 60730-1:2011Automatic electrical controls for household and similar use – Part 1: General requirements
IEC 60730-1:2010 (Modified)

13/05/2016

EN 60730-1:2000
+ A12:2003
+ A13:2004
+ A14:2005
+ A16:2007
+ A1:2004
+ A2:2008

Note 2.1

28/06/2016
Cenelec EN 60730-2-5:2002Automatic electrical controls for household and similar use – Part 2-5: Particular requirements for automatic electrical burner control systems
IEC 60730-2-5:2000 (Modified)

12/08/2016
EN 60730-2-5:2002/A11:2005

12/08/2016

Note 3
EN 60730-2-5:2002/A1:2004
IEC 60730-2-5:2000/A1:2004 (Modified)

12/08/2016

Note 3
EN 60730-2-5:2002/A2:2010
IEC 60730-2-5:2000/A2:2008 (Modified)

12/08/2016

Note 3
Cenelec EN 60730-2-6:2008Automatic electrical controls for household and similar use – Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 60730-2-6:2007 (Modified)

12/08/2016
Cenelec EN 60730-2-7:2010Automatic electrical controls for household and similar use – Part 2-7: Particular requirements for timers and time switches
IEC 60730-2-7:2008 (Modified)

13/05/2016
EN 60730-2-7:2010/AC:2011

13/05/2016
Cenelec EN 60730-2-8:2002Automatic electrical controls for household and similar use – Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
IEC 60730-2-8:2000 (Modified)

13/05/2016
EN 60730-2-8:2002/A1:2003
IEC 60730-2-8:2000/A1:2002 (Modified)

13/05/2016

Note 3
Cenelec EN 60730-2-9:2010Automatic electrical controls for household and similar use – Part 2-9: Particular requirements for temperature sensing controls
IEC 60730-2-9:2008 (Modified)

13/05/2016
Cenelec EN 60730-2-14:1997Automatic electrical controls for household and similar use – Part 2-14: Particular requirements for electric actuators
IEC 60730-2-14:1995 (Modified)

13/05/2016
EN 60730-2-14:1997/A1:2001
IEC 60730-2-14:1995/A1:2001

13/05/2016

Note 3
Cenelec EN 60730-2-15:2010Automatic electrical controls for household and similar use – Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls
IEC 60730-2-15:2008 (Modified)

13/05/2016
Cenelec EN 60870-2-1:1996Telecontrol equipment and systems – Part 2: Operating conditions – Section 1: Power supply and electromagnetic compatibility
IEC 60870-2-1:1995

13/05/2016
Cenelec EN 60945:2002Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
IEC 60945:2002

13/05/2016
Cenelec EN 60947-1:2007Low-voltage switchgear and controlgear – Part 1: General rules
IEC 60947-1:2007

13/05/2016
EN 60947-1:2007/A2:2014
IEC 60947-1:2007/A2:2014

13/05/2016

Note 3

14/10/2017
EN 60947-1:2007/A1:2011
IEC 60947-1:2007/A1:2010

13/05/2016

Note 3
Cenelec EN 60947-2:2006Low-voltage switchgear and controlgear – Part 2: Circuit-breakers
IEC 60947-2:2006

13/05/2016
EN 60947-2:2006/A1:2009
IEC 60947-2:2006/A1:2009

13/05/2016

Note 3
EN 60947-2:2006/A2:2013
IEC 60947-2:2006/A2:2013

13/05/2016

Note 3
Cenelec EN 60947-3:2009Low-voltage switchgear and controlgear – Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:2008

13/05/2016
EN 60947-3:2009/A1:2012
IEC 60947-3:2008/A1:2012

13/05/2016

Note 3
Cenelec EN 60947-4-1:2010Low-voltage switchgear and controlgear – Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
IEC 60947-4-1:2009

13/05/2016
EN 60947-4-1:2010/A1:2012
IEC 60947-4-1:2009/A1:2012

13/05/2016

Note 3
Cenelec EN 60947-4-2:2012Low-voltage switchgear and controlgear – Part 4-2: Contactors and motor-starters – AC semiconductor motor controllers and starters
IEC 60947-4-2:2011

13/05/2016
Cenelec EN 60947-4-3:2014Low-voltage switchgear and controlgear – Part 4-3: Contactors and motor-starters – AC semiconductor controllers and contactors for non-motor loads
IEC 60947-4-3:2014

13/05/2016

EN 60947-4-3:2000
+ A1:2006
+ A2:2011

Note 2.1

11/06/2017
Cenelec EN 60947-5-1:2004Low-voltage switchgear and controlgear – Part 5-1: Control circuit devices and switching elements – Electromechanical control circuit devices
IEC 60947-5-1:2003

13/05/2016
EN 60947-5-1:2004/AC:2005

13/05/2016
EN 60947-5-1:2004/A1:2009
IEC 60947-5-1:2003/A1:2009

13/05/2016

Note 3
EN 60947-5-1:2004/AC:2004

13/05/2016
Cenelec EN 60947-5-2:2007Low-voltage switchgear and controlgear – Part 5-2: Control circuit devices and switching elements – Proximity switches
IEC 60947-5-2:2007

13/05/2016
EN 60947-5-2:2007/A1:2012
IEC 60947-5-2:2007/A1:2012

13/05/2016

Note 3
Cenelec EN 60947-5-3:1999Low-voltage switchgear and controlgear – Part 5-3: Control circuit devices and switching elements – Requirements for proximity devices with defined behaviour under fault conditions (PDF)
IEC 60947-5-3:1999

13/05/2016
EN 60947-5-3:1999/A1:2005
IEC 60947-5-3:1999/A1:2005

13/05/2016

Note 3
Cenelec EN 60947-5-6:2000Low-voltage switchgear and controlgear – Part 5-6: Control circuit devices and switching elements – DC interface for proximity sensors and switching amplifiers (NAMUR)
IEC 60947-5-6:1999

13/05/2016
Cenelec EN 60947-5-7:2003Low-voltage switchgear and controlgear – Part 5-7: Control circuit devices and switching elements – Requirements for proximity devices with analogue output
IEC 60947-5-7:2003

13/05/2016
Cenelec EN 60947-5-9:2007Low-voltage switchgear and controlgear – Part 5-9: Control circuit devices and switching elements – Flow rate switches
IEC 60947-5-9:2006

13/05/2016
Cenelec EN 60947-6-1:2005Low-voltage switchgear and controlgear – Part 6-1: Multiple function equipment – Transfer switching equipment
IEC 60947-6-1:2005

13/05/2016
EN 60947-6-1:2005/A1:2014
IEC 60947-6-1:2005/A1:2013

13/05/2016

Note 3

17/01/2017
Cenelec EN 60947-6-2:2003Low-voltage switchgear and controlgear – Part 6-2: Multiple function equipment – Control and protective switching devices (or equipment) (CPS)
IEC 60947-6-2:2002

13/05/2016
EN 60947-6-2:2003/A1:2007
IEC 60947-6-2:2002/A1:2007

13/05/2016

Note 3
Cenelec EN 60947-8:2003Low-voltage switchgear and controlgear – Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
IEC 60947-8:2003

13/05/2016
EN 60947-8:2003/A2:2012
IEC 60947-8:2003/A2:2011

13/05/2016

Note 3
EN 60947-8:2003/A1:2006
IEC 60947-8:2003/A1:2006

13/05/2016

Note 3
Cenelec EN 60974-10:2014Arc welding equipment – Part 10: Electromagnetic compatibility (EMC) requirements
IEC 60974-10:2014

13/05/2016

EN 60974-10:2007

Note 2.1

13/03/2017
Cenelec EN 61000-3-2:2014Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
IEC 61000-3-2:2014

13/05/2016

EN 61000-3-2:2006
+ A1:2009
+ A2:2009

Note 2.1

30/06/2017
Cenelec EN 61000-3-3:2013Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
IEC 61000-3-3:2013

13/05/2016

EN 61000-3-3:2008

Note 2.1

18/06/2016
Cenelec EN 61000-3-11:2000Electromagnetic compatibility (EMC) – Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current <= 75 A and subject to conditional connection
IEC 61000-3-11:2000

13/05/2016
Cenelec EN 61000-3-12:2011Electromagnetic compatibility (EMC) – Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase
IEC 61000-3-12:2011 + IS1:2012

13/05/2016
Cenelec EN 61000-6-1:2007Electromagnetic compatibility (EMC) – Part 6-1: Generic standards – Immunity for residential, commercial and light-industrial environments
IEC 61000-6-1:2005

13/05/2016
Cenelec EN 61000-6-2:2005Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for industrial environments
IEC 61000-6-2:2005

13/05/2016
EN 61000-6-2:2005/AC:2005

13/05/2016
Cenelec EN 61000-6-3:2007Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments
IEC 61000-6-3:2006

13/05/2016
EN 61000-6-3:2007/A1:2011
IEC 61000-6-3:2006/A1:2010

13/05/2016

Note 3
EN 61000-6-3:2007/A1:2011/AC:2012

13/05/2016
Cenelec EN 61000-6-4:2007Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments
IEC 61000-6-4:2006

13/05/2016
EN 61000-6-4:2007/A1:2011
IEC 61000-6-4:2006/A1:2010

13/05/2016

Note 3
Cenelec EN 61000-6-5:2015 (new)Electromagnetic compatibility (EMC) – Part 6-5: Generic standards – Immunity for equipment used in power station and substation environment
IEC 61000-6-5:2015

This is the first publication
Cenelec EN 61008-1:2012Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) – Part 1: General rules
IEC 61008-1:2010 (Modified)

13/05/2016

EN 61008-1:2004
+ A11:2007
+ A12:2009
+ A13:2012

Note 2.1

18/06/2017
EN 61008-1:2012/A1:2014
IEC 61008-1:2010/A1:2012 (Modified)

13/05/2016

Note 3

04/08/2017
Cenelec EN 61009-1:2012Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) – Part 1: General rules
IEC 61009-1:2010 (Modified)

13/05/2016

EN 61009-1:2004
+ A11:2008
+ A12:2009
+ A13:2009
+ A14:2012

Note 2.1

18/06/2017
Cenelec EN 61131-2:2007Programmable controllers – Part 2: Equipment requirements and tests
IEC 61131-2:2007

13/05/2016
Cenelec EN 61204-3:2000Low voltage power supplies, d.c. output – Part 3: Electromagnetic compatibility (EMC)
IEC 61204-3:2000

13/05/2016
Cenelec EN 61326-1:2013Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements
IEC 61326-1:2012

13/05/2016
Cenelec EN 61326-2-1:2013Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-1: Particular requirements – Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
IEC 61326-2-1:2012

13/05/2016
Cenelec EN 61326-2-2:2013Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-2: Particular requirements – Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
IEC 61326-2-2:2012

13/05/2016
Cenelec EN 61326-2-3:2013Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-3: Particular requirements – Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
IEC 61326-2-3:2012

13/05/2016
Cenelec EN 61326-2-4:2013Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-4: Particular requirements – Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
IEC 61326-2-4:2012

13/05/2016
Cenelec EN 61326-2-5:2013Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-5: Particular requirements – Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1
IEC 61326-2-5:2012

13/05/2016
Cenelec EN 61439-1:2011Low-voltage switchgear and controlgear assemblies – Part 1: General rules
IEC 61439-1:2011

13/05/2016
EN 61439-1:2011 does not give presumption of conformity without another part of the standard.
Cenelec EN 61439-2:2011Low-voltage switchgear and controlgear assemblies – Part 2: Power switchgear and controlgear assemblies
IEC 61439-2:2011

13/05/2016
Cenelec EN 61439-3:2012Low-voltage switchgear and controlgear assemblies – Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
IEC 61439-3:2012

13/05/2016
Cenelec EN 61439-4:2013Low-voltage switchgear and controlgear assemblies – Part 4: Particular requirements for assemblies for construction sites (ACS)
IEC 61439-4:2012

13/05/2016
Cenelec EN 61439-5:2011Low-voltage switchgear and controlgear assemblies – Part 5: Assemblies for power distribution in public networks
IEC 61439-5:2010

12/08/2016
Cenelec EN 61439-6:2012Low-voltage switchgear and controlgear assemblies – Part 6: Busbar trunking systems (busways)
IEC 61439-6:2012

13/05/2016
Cenelec EN 61543:1995Residual current-operated protective devices (RCDs) for household and similar use – Electromagnetic compatibility
IEC 61543:1995

13/05/2016
EN 61543:1995/A2:2006
IEC 61543:1995/A2:2005

13/05/2016

Note 3
EN 61543:1995/A11:2003/AC:2004

13/05/2016
EN 61543:1995/AC:1997

13/05/2016
EN 61543:1995/A11:2003

13/05/2016

Note 3
EN 61543:1995/A12:2005

13/05/2016

Note 3
Cenelec EN 61547:2009Equipment for general lighting purposes – EMC immunity requirements
IEC 61547:2009 + IS1:2013

13/05/2016
Cenelec EN 61557-12:2008Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 12: Performance measuring and monitoring devices (PMD)
IEC 61557-12:2007

13/05/2016
Cenelec EN 61800-3:2004Adjustable speed electrical power drive systems – Part 3: EMC requirements and specific test methods
IEC 61800-3:2004

13/05/2016
EN 61800-3:2004/A1:2012
IEC 61800-3:2004/A1:2011

13/05/2016

Note 3
Cenelec EN 61812-1:2011Time relays for industrial and residential use – Part 1: Requirements and tests
IEC 61812-1:2011

13/05/2016
Cenelec EN 62020:1998Electrical accessories – Residual current monitors for household and similar uses (RCMs)
IEC 62020:1998

13/05/2016
EN 62020:1998/A1:2005
IEC 62020:1998/A1:2003 (Modified)

13/05/2016

Note 3
Cenelec EN 62026-1:2007Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 1: General rules
IEC 62026-1:2007

13/05/2016
EN 62026-1:2007 does not give presumption of conformity without another part of the standard.
Cenelec EN 62026-2:2013Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 2: Actuator sensor interface (AS-i)
IEC 62026-2:2008 (Modified)

13/05/2016
Cenelec EN 62026-3:2009Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 3: DeviceNet
IEC 62026-3:2008

12/08/2016
Cenelec EN 62026-7:2013Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 7: CompoNet
IEC 62026-7:2010 (Modified)

13/05/2016
Cenelec EN 62040-2:2006Uninterruptible power systems (UPS) – Part 2: Electromagnetic compatibility (EMC) requirements
IEC 62
IEC 62040-2:2005

13/05/2016
EN 62040-2:2006/AC:2006

13/05/2016
Cenelec EN 62052-11:2003Electricity metering equipment (AC) – General requirements, tests and test conditions – Part 11: Metering equipment
IEC 62052-11:2003

13/05/2016
EN 62052-11:2003 does not give presumption of conformity without a part of the EN 62053 series.
Cenelec EN 62052-21:2004Electricity metering equipment (a.c.) – General requirements, tests and test conditions – Part 21: Tariff and load control equipment
IEC 62052-21:2004

13/05/2016
EN 62052-21:2004 does not give presumption of conformity without a part of the EN 62054 series.
Cenelec EN 62053-11:2003Electricity metering equipment (a.c.) – Particular requirements – Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
IEC 62053-11:2003

13/05/2016
Cenelec EN 62053-21:2003Electricity metering equipment (a.c.) – Particular requirements – Part 21: Static meters for active energy (classes 1 and 2)
IEC 62053-21:2003

13/05/2016
Cenelec EN 62053-22:2003Electricity metering equipment (a.c.) – Particular requirements – Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
IEC 62053-22:2003

13/05/2016
Cenelec EN 62053-23:2003Electricity metering equipment (a.c.) – Particular requirements – Part 23: Static meters for reactive energy (classes 2 and 3)
IEC 62053-23:2003

13/05/2016
Cenelec EN 62054-11:2004Electricity metering (a.c.) – Tariff and load control – Part 11: Particular requirements for electronic ripple control receivers
IEC 62054-11:2004

13/05/2016
Cenelec EN 62054-21:2004Electricity metering (a.c.) – Tariff and load control – Part 21: Particular requirements for time switches
IEC 62054-21:2004

13/05/2016
Cenelec EN 62135-2:2008Resistance welding equipment – Part 2: Electromagnetic compatibility (EMC) requirements
IEC 62135-2:2007

12/08/2016
Cenelec EN 62310-2:2007Static transfer systems (STS) – Part 2: Electromagnetic compatibility (EMC) requirements
IEC 62310-2:2006 (Modified)

13/05/2016
Cenelec EN 62423:2012Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
IEC 62423:2009 (Modified)

13/05/2016

EN 62423:2009

Note 2.1

19/06/2017
Cenelec EN 62586-1:2014Power quality measurement in power supply systems – Part 1: Power quality instruments (PQI)
IEC 62586-1:2013

13/05/2016
Cenelec EN 62586-2:2014Power quality measurement in power supply systems – Part 2: Functional tests and uncertainty requirements
IEC 62586-2:2013

13/05/2016
Cenelec EN 62606:2013General requirements for arc fault detection devices
IEC
IEC 62606:2013 (Modified)

13/05/2016
ETSI EN 300 386 V1.6.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

13/05/2016
ETSI EN 301 489-1 V1.9.2Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements

13/05/2016
ETSI EN 301 489-34 V1.4.1Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones

13/05/2016

(1) ESO: European standardisation organisation:

CEN: Rue de la Science 23, B-1040 Brussels, Phone: +32 2 550 08 11; Fax: +32 2 550 08 19 (http://www.cen.eu)

CENELEC: Rue de la Science 23, B-1040 Brussels, Phone: +32 2 550 08 11; Fax: +32 2 550 08 19 (http://www.cenelec.eu)

ETSI: 650, route des Lucioles, F-06921 Sophia Antipolis, Tel.+33 492 944200; fax +33 493 654716, (http://www.etsi.eu)

 

Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal (“dow”), set by the European standardisation organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.

Note 2.1: The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation for those products or services that fall within the scope of the new standard. Presumption of conformity with the essential or other requirements of the relevant Union legislation for products or services that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.

Note 3: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential or other requirements of the relevant Union legislation.

 

Source link: https://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/electromagnetic-compatibility_en